How to clean inflatable hot tub?

Regular cleaning of your inflatable hot tub will certainly ensure it stays clean, hygenically fit for use and above all prolong its lifespan.

But “How to clean an inflatable hot tub” is a question you may be asking yourself, especially if you’ve recently purchased one!

How to clean inflatable hot tub

Why Cleaning Your Inflatable Hot Tub is Important

Cleaning your inflatable hot tub is important for several reasons:

  1. Visual appeal: Regular cleaning keeps your hot tub visually appealing and inviting, ensuring a pleasant experience for you and your guests.
  2. Hygiene: Hot tubs can be a breeding ground for bacteria if not properly cleaned. Regular cleaning helps minimize the risk of infection and ensures a safe and healthy spa experience.
  3. Performance: Cleaning your hot tub helps maintain the efficiency of filters and pumps by preventing clogs caused by dirt and debris. This ensures optimal performance and longevity for your hot tub.

Benefits of Regular Cleaning

Regular cleaning offers several benefits for your inflatable hot tub:

  1. Longer lifespan: By cleaning your hot tub regularly, you can prevent damage caused by accumulated dirt and debris. This helps extend the lifespan of your hot tub.
  2. Better water quality: Cleaning your hot tub removes contaminants and maintains proper water chemistry, resulting in cleaner and clearer water for a more enjoyable spa experience.
  3. Cost-effectiveness: Regular cleaning reduces the need for costly repairs or replacements caused by neglect. By taking care of your hot tub, you can save money in the long run.
  4. Peace of mind: Knowing that your hot tub is clean and well-maintained gives you peace of mind, allowing you to fully relax and enjoy your spa experience.

In the next section, we will discuss the step-by-step process of cleaning an inflatable hot tub and provide tips for maintaining its cleanliness.


Preparing for Cleaning


Cleaning an inflatable hot tub is an important maintenance task that ensures its longevity and hygienic use. Before diving into how to clean inflatable hot tub, there are a few steps to take to prepare:

Shutting Off the Power


Before beginning the cleaning process, it is crucial to disconnect the power supply to avoid any electrical hazards. Turn off the hot tub’s power source and unplug it from any electrical outlets. Safety should always be the top priority when handling any electronic equipment.

Removing Debris and Blockages


Start by removing any debris and blockages from the hot tub. This includes leaves, twigs, and other larger particles that may have accumulated in the tub. Use a net or skimmer to scoop out any visible debris from the water surface. Additionally, check and clear the drainage valve to ensure proper water flow during the cleaning process.


Cleaning the Filter Pump


Disconnecting the Filter Pump

Cleaning the filter pump of your inflatable hot tub is an essential part of its maintenance. Follow these steps to properly clean the filter pump:

  1. Turn off the power supply to the hot tub and unplug the filter pump from the electrical outlet.
  2. Locate the filter pump, usually attached to the side of the hot tub.
  3. Disconnect the filter pump by removing any connecting hoses or plugs.
  4. Carefully remove the filter pump from the hot tub, making sure not to spill any water or debris.

Cleaning and Replacing the Filter


Once the filter pump is disconnected, you can proceed with cleaning and replacing the filter:

  1. Rinse the filter with clean water to remove any loose debris or particles.
  2. If the filter is heavily soiled, use a mild soap or hot tub cleaner to scrub away grime and dirt.
  3. Rinse the filter thoroughly to remove any cleaning residue.
  4. Allow the filter to dry completely before placing it back into the filter pump.

Regularly cleaning and replacing the filter of your inflatable hot tub will ensure optimal performance and water quality.

Refer to your hot tub’s manual for specific instructions on cleaning the filter pump and filter.


Draining the Tub


Attaching the Drainage Hose

To begin the process of cleaning your inflatable hot tub, you will need to drain the water from it. Here’s how to do it:

  1. Locate the drainage valve on your hot tub. It is usually located on the bottom or side of the tub.
  2. Attach one end of the drainage hose to the valve securely.
  3. Make sure the other end of the hose is positioned in a suitable drainage area, such as a nearby sink, a drain, or a designated outdoor drainage area.

Choosing a Suitable Drainage Location


When choosing a drainage location for your inflatable hot tub, keep the following in mind:

  • Make sure the location is suitable for water drainage and can handle the volume of water from the tub.
  • Avoid draining the water onto delicate plants or grass, as the chemicals in the water may damage them.
  • Be sure to comply with local regulations regarding water drainage.

By following these steps, you can successfully drain your inflatable hot tub and prepare it for cleaning and maintenance.

Cleaning the Surface of the Tub

Cleaning the surface of your inflatable hot tub is an essential step in maintaining its hygiene and prolonging its lifespan. Here are two effective methods for cleaning the surface:

Using Warm Water and a Soft Cloth

  • Fill a spray bottle with warm water and spray it on the surface of the tub.
  • Use a soft cloth or sponge to wipe the surface gently in a circular motion.
  • Pay extra attention to areas with visible dirt or stains.
  • Rinse the tub thoroughly with clean water to remove any residue.

Removing Stubborn Stains with Detergent or Soap

  • For stubborn stains, add a small amount of low-suds detergent or liquid soap to warm water.
  • Dip a soft cloth or sponge into the soapy water and gently scrub the stained area.
  • Rinse the tub thoroughly with clean water to ensure all soap residue is removed.

Never use abrasive materials or scrub brushes, as they can damage the surface of the inflatable tub.

Maintaining the Cleanliness

After cleaning your inflatable hot tub, it’s essential to maintain its cleanliness to ensure a safe and enjoyable experience. Here are some tips to help you keep your tub clean:

Showering Before Using the Tub

One of the simplest ways to maintain cleanliness is by showering before entering the tub. This helps remove any body oils, perfumes, makeup, and other chemicals that can contaminate the water. It also helps prevent the buildup of bacteria and other pollutants in the tub.

Adding Sanitizers to the Water


To kill bacteria and maintain clean water, it’s important to add sanitizers to the tub. Chlorine or bromine sanitizers are commonly used to keep the water hygienic.

Additionally, mineral sanitizers with oxidizers can be used to enhance the effectiveness of the sanitizers. Regularly test the water’s pH levels and adjust accordingly to ensure proper sanitization.


By following a proper cleaning routine and tips mentioned as outlined above, you can ensure that your hot tub remains clean, hygienic, and enjoyable for years to come.

Scroll to Top